1. Home
  2. Crossmembers
  3. 4L80E Crossmember Chevelle 1964-1972 Hardtop

4L80E Crossmember Chevelle 1964-1972 Hardtop

Write a Review
Your Price: $299.00
Crossmember fits GM A body (Chevelle/El Camino/Malibu/Monte Carlo/Skylark/Cutlass/Lemans/Tempest/GTO) 1964-1972 with 4L80E transmission
Part Number: CMRCAE4-1

Choose Options

Crossmember fits GM A body (Chevelle/El Camino/Malibu/Monte Carlo/Skylark/Cutlass/Lemans/Tempest/GTO) 1968-1972

FITS THE FOLLOWING TRANSMISSIONS 4L80E 1968-1972 TH400 SHORT TAIL 1964-1967 (WILL ACCOMMODATE 4L80E IN SOME 1967's THAT HAVE 8 CROSSMEMBER HOLES ON EACH SIDE OF THE FRAME)

INCLUDES:
  • NEW MOUNTING HARDWARE (PURCHASE TRANSMISSION MOUNT SEPARATELY P/N GMTM)
  • FINISHED IN A BLACK POWDER COAT

1964-1972 HARDTOPS (NOTE: DISTANCE BETWEEN CROSSMEMBER FRAME HOLES IS APPROXIMATELY 53-5/8 MEASURE YOUR FRAME OR CROSSMEMBER TO INSURE PROPER SELECTION)

INSTALLATION NOTES:

  • THE CROSSMEMBER IS INSTALLED WITH THE TRANSMISSION MOUNTING TAB POSITIONED TOWARDS THE FRONT OF THE CAR.
  • THE CROSSMEMBER IS INSTALLED SO THAT THE EXHAUST CLEARANCE HUMPS ARE CLOSED ON THE TOP AND OPEN ON THE BOTTOM.
  • THE SUPPLIED ALUMINUM SPACERS ARE UTILIZED TO PROVIDE CUSTOM POSITIONING OF THE TRANSMISSION MOUNT. THEY ARE TO BE POSITIONED BETWEEN THE CROSSMEMBER MOUNTING TAB AND THE TRANSMISSION MOUNT. SELECT THE DESIRED AMOUNT OF SPACERS AND MATCH A BOLT OF PROPER LENGTH TO INSURE FULL ENGAGEMENT INTO THE TRANSMISSION MOUNT. SOME APPLICATIONS WILL NOT REQUIRE ANY SPACERS.
  • SOME VEHICLES OF THIS GENERATION ARE EQUIPPED WITH A CROSSMEMBER THAT BOLTS DIRECTLY TO THE VEHICLES FRAME RAIL, WHILE OTHERS ARE EQUIPPED WITH A CROSSMEMBER THAT UTILIZES A TAB THAT SETS ON THE FRAME RAIL AND IS THEN CLAMPED BY A STEEL CAP THAT IS EMBEDDED WITH A RUBBER LINER. THE RCAE-4L80 CROSSMEMBER BOLTS DIRECTLY TO THE FRAME RAIL AND UTILIZES THE FACTORY FRAME HOLES. TO UTILIZE THE PROVIDED 7/16 HARDWARE IT IS NECESSARY TO ENLARGE THE HOLES IN THE FRAME RAILS WITH A 1/2" DRILL. IF THE INSTALLER CHOOSES TO UTILIZE THE STOCK SIZE 3/8 HARDWARE, IT IS STRONGLY RECOMMENDED THAT THE INSTALLER OBTAIN GRADE 8 FASTENERS AND WASHERS TO COMPENSATE.
  • Related Items

    AOD Crossmember Mustang 1967-1973
    Price: $229.00 Sale Price: $179.00 Sale
    Fox Body Crossmember Mustang 1979-1993
    Price: $155.00 Sale Price: $149.95 Sale
    TH350 Crossmember Camaro 1967-1969
    Price: $269.00 Sale Price: $219.00 Sale

    Browse Similar Items