700R4 Crossmember Chevelle 1973-1982 Hardtop

FITS THE FOLLOWING TRANSMISSIONS: TH350/MUNCIE/POWERGLIDE/T-10/700R4/4L60/4L60E/SUPER T-10/SAGINAW/TH200

INCLUDES:
FINISHED IN A BLACK POWDER COAT
NEW MOUNTING HARDWARE (PURCHASE TRANSMISSION MOUNT SEPARATELY)

Crossmember fits GM A body cars Chevelle/El Camino/Malibu/Monte Carlo/Skylark/Cutlass/Lemans/Tempest/GTO)

1973-1977 HARDTOPS (NOTE: DISTANCE BETWEEN CROSSMEMBER FRAME HOLES IS APPROXIMATELY 51-1/8. MEASURE YOUR FRAME OR CROSSMEMBER TO INSURE PROPER SELECTION) NOTE: WILL NOT FIT 73-75 EL CAMINOS WITH THE BOXED FRAME RAILS.

INSTALLATION NOTES:

THIS CROSSMEMBER IS INSTALLED WITH THE LABEL FACING THE REAR OF THE VEHICLE.

THE CROSSMEMBER IS INSTALLED SO THAT THE EXHAUST CLEARANCE HUMPS ARE CLOSED ON THE TOP AND OPEN ON THE BOTTOM

TO UTILIZE THE PROVIDED 7/16 HARDWARE IT IS NECESSARY TO ENLARGE THE HOLES IN THE FRAME RAILS WITH A 1/2" DRILL. IF THE INSTALLER CHOOSES TO UTILZE THE STOCK SIZE 3/8 HARDWARE, IT IS STRONGLY RECOMMENDED THAT THE INSTALLER OBTAIN GRADE 8 FASTENERS AND WASHERS TO COMPENSATE.