TH350 Crossmember Chevelle 1973-1977 Hardtop

FITS THE FOLLOWING TRANSMISSIONS TH350/MUNCIE/POWERGLIDE/T-10/SUPER T-10/SAGINAW/TH200/TH400/2004R

INCLUDES:

• NEW MOUNTING HARDWARE (PURCHASE TRANSMISSION MOUNT SEPARATELY)
• FINISHED IN A BLACK POWDER COAT

1973-1977 HARDTOPS-WILL NOT FIT 73-75 EL CAMINO WITH THE BOXED FRAME RAIL (NOTE: DISTANCE BETWEEN CROSSMEMBER FRAME HOLES IS APPROXIMATELY 51-1/8 MEASURE YOUR FRAME OR CROSSMEMBER TO INSURE PROPER SELECTION)


INSTALLATION NOTES:

THIS CROSSMEMBER IS INSTALLED WITH THE LABEL FACING THE REAR OF THE VEHICLE.

THE CROSSMEMBER IS INSTALLED SO THAT THE EXHAUST CLEARANCE HUMPS ARE CLOSED ON THE TOP AND OPEN ON THE BOTTOM.

TO UTILIZE THE PROVIDED 7/16 HARDWARE IT IS NECESSARY TO ENLARGE THE HOLES IN THE FRAME RAILS WITH A 1/2" DRILL. IF THE INSTALLER CHOOSES TO UTILIZE THE STOCK SIZE 3/8 HARDWARE, IT IS STRONGLY RECOMMENDED THAT THE INSTALLER OBTAIN GRADE 8 FASTENERS AND WASHERS TO COMPENSATE.